Quoc Huy has been assessed and recognized by the Quality Accreditation Office - Ministry of Science and Technology (BoA) and recognized as a laboratory meeting ISO/IEC 17025:2017 (No. VILAS 885 - Registration number: 180 & 560/TN - Resettlement) on March 16, 2021.
Quoc Huy Inspection - Calibration - Testing Department will meet the requirements of customers with advantages such as:
- The standard instruments and reference materials meet the requirements of traceability to national and international standards, in accordance with the standards according to the international metrological system.
- Well-trained staff, always complying with the requirements of the Verification - Calibration - Testing Procedure
- The environmental conditions of the Chamber are regularly controlled and maintained in accordance with the requirements of the Inspection - Calibration - Testing Procedure.
- Test - Calibration - Rapid Test (average 1 → 3 days)
- Testing - Calibration - Testing pricing competitively
Testing - Calibration - Testing Accredited according to ISO/IEC 17025:2017
Verification - Calibration of non-destructive testing equipment
Applicable Standard: ISO 17025: 2017, ASTM E 376, ASTM E 317, ASTM E 797, ASTM E 1444, ASTM E 1390, ASTM E 1079
- Coating Thickness Gauge
- Impedance screen Eddy Current tester
- Ultrasonic defect detection equipment
- Ultrasonic Thickness Measuring equipment
- Endoscope Measuring Head
- Optical Density Gauge
- Industrial X-ray Film Reading Equipment
- Magnetic Yokes magnetic powder equipment
Test - Material Composition Analysis
Using the Hitachi OE750 - the latest generation emission spectrometer:
- Vacuum Optical Chamber Technology
- Direct spectrum transmission (no fiber optic cable)
- Using high-resolution CMOS sensor (16 CMOS sensor chips with a resolution of 4096 pixels/chip)
- Has a very low LOD detection limit: (C: 5 ppm; B: 1 ppm; Si: 5 ppm; P: 2 ppm; S: 5 ppm; Mg: 1 ppm; N: 10 ppm,...)
- Ability to analyze up to:
- 36 elements (Al alloys)
- 29 elements (Cu alloys)
- 31 elements (Fe alloys)
- Capable of analyzing both O, H, and N gaseous elements in some alloy substrates.
- Wavelength Range: 119 - 766 nm
![]() | ![]() |
The ability to analyze a wide range of standards-compliant materials
ASTM E415-21 | Carbon steel and low alloy steel |
ASTM E1086-14 | Stainless Steel |
ASTM E1999-18 | Gang |
ASTM E1251-17a | Aluminum and Aluminum alloy:
|
ASTM E15079:2015 | Copper and Copper alloy:
|
ISO 03815-1-2005 | Zinc and Zinc alloy
|
ASTM E3047-16 | Nickel and Nickel Alloy
|
![]() | ![]() | ![]() |
Please contact us for advice and support:
- High-standard instrument accuracy
- Good measurement uncertainty
- Quick calibration time: 1 to 3 days
- Consistent, competitive calibration costs
Hotline: 0776 903 790 (Mr Son – HCMC), 0382 051 041 (Mr Tho - HCMC)